Hydronic Fan Heater, Up to 1200 Thermal Watts, About 4,000 BTU/hr 
This is a heating accessory only. It does not generate electricity by itself.
 
All PiggyPower generator units make electricity from heat. During normal operation, the generator also produces hot water because the cooling side has to carry heat away from the cell. The HeatBank 1200 takes that hot water, pulls heat out through a radiator, and blows it into the room as warm air. This model is best paired with the 40 W PiggyPower Cell because that system is built around roughly 1200 watts of heat that needs to be carried away. In plain English, the 40 W Cell makes electricity, the water loop captures the leftover heat, and the HeatBank 1200 turns that captured heat into useful room heat.
 
Rated output is up to 1200 thermal watts, which is about 4,000 BTU/hr. This is heat output, not electrical output. Actual heat output depends on water temperature, room temperature, water flow, and airflow. Hotter water and colder room air can increase output. Cooler water and warmer room air will reduce output.
 
The fans are powered separately through USB. The HeatBank 1200 includes a 5 V USB to 12 V step up adapter, so you can plug the fans into a normal USB power bank, USB outlet, or other suitable 5 V USB source. The two fans together draw about 2.16 watts at 12 volts, so it still takes very little power to run. A regular power bank can run the fans for many hours, and in most setups you will run out of stored heat long before you run out of fan power.
 
This is not an electric space heater. It does not create heat from electricity. It uses heat that is already stored in hot water and releases it into the room through a radiator and fans. In plain English, the water acts like the heat storage, and the HeatBank releases that stored heat when you want it.
 

WHAT IT DOES

The PiggyPower HeatBank 1200 is a compact hydronic fan heater. Hydronic simply means it moves heat using water.
 
You circulate hot water through the HeatBank. The internal radiator pulls heat out of that water. The fans push air through the radiator and blow warm air into the room.
 
Simple version:
 
Hot water goes in.
 
Warm air comes out.
 
Cooler water returns to the loop.
 
This makes the HeatBank useful for PiggyPower systems, off grid heating, blackout setups, cabins, sheds, workshops, emergency thermal storage, and any controlled hot water loop where you want to turn stored heat into usable room heat.

USB POWERED FAN

The HeatBank 1200 does not need a wall outlet to move air. The fans are low power and can run from a normal USB power bank using the included 5 V to 12 V step up adapter.
 
The fans are powered separately on purpose. This gives you steady, dependable airflow while the unit is heating, instead of relying on changing water temperature or unstable power. It also makes the unit easier to use with small batteries, USB power banks, and PiggyPower setups.
 
Fan draw: about 2.16 W total at 12 V
 
Power input: standard 5 V USB using included step up adapter
 
Power source: USB power bank, USB outlet, or other suitable USB source
 
Power bank: not included unless specifically selected or shown
 
For context, a small power bank stores far more energy than these fans need for a normal heating run. Even after normal conversion losses, a power bank can run the fans for many hours. In a full PiggyPower setup, a PiggyPower Cell may also help recharge the USB battery while the HeatBank is being used.

WHY IT IS CALLED THE HEATBANK 600

The 1200 in HeatBank 1200 refers to the unit’s heat rejection rating under favorable cold room conditions.

In testing, the HeatBank 600 class setup reached the 600 thermal watt range under favorable conditions. The HeatBank 1200 uses a larger 2 fan radiator setup with more heat exchange area and more airflow, allowing the same basic concept to scale up to about 1200 thermal watts, or roughly 4,000 BTU/hr.

That is why this model is called the PiggyPower HeatBank 1200.

The exact number is not fixed like a normal electric heater. A normal 1200 watt electric heater is always dumping about 1200 watts of heat when running. The HeatBank is different because it depends on the hot water feeding it. With hotter water, colder air, better flow, or stronger airflow, output can be higher. With cooler water, warmer air, weak flow, or blocked airflow, output will be lower.

BEST USES

The HeatBank 1200 is best used for:

Off-grid heating experiments

Blackout and emergency preparedness

Small room, shed, cabin, or workshop heating support

PiggyPower CHP-style systems

Releasing stored heat from hot water

Pulling heat out of a PiggyPower water loop

Testing thermal storage setups

Turning hot water into forced-air heat

This unit is especially useful when you already have hot water available and want a controlled way to move that heat into the air instead of letting it sit in a bucket, tank, or loop.

PIGGYPOWER SYSTEM USE

In a PiggyPower setup, heat can be used in more than 1 way. A PiggyPower Cell can produce electricity from a heat source while the water loop carries away heat. The HeatBank 1200 gives that hot water another job by letting it release heat into the room.

That means 1 heat source can potentially support multiple useful outputs:

Electricity from the PiggyPower Cell
Hot water in the loop
Room heat through the HeatBank
USB fan power that can be supported by a small power bank

The HeatBank 1200 is 1 piece of that larger PiggyPower heat recovery system.

WHAT IS INCLUDED

1 fully assembled PiggyPower HeatBank 1200 unit
1 radiator-style heat exchanger
2 mounted 12 V fans
Installed housing
Inlet and outlet water connections
1 included 5 V USB to 12 V step-up adapter
Basic setup and operating instructions

Hot water source, PiggyPower Cell, pump, battery, fuel, stove, bucket, tank, external tubing, and full loop hardware are not included unless specifically shown or selected.

THERMAL OUTPUT

Rated class: up to 1200 thermal watts
Approximate BTU/hr equivalent: about 4,000 BTU/hr
Heat type: hydronic forced-air heat
Fan count: 2
Fan power draw: about 2.16 W at 12 V
Fan power method: USB powered through included 5 V to 12 V step-up adapter
Function: pulls heat from hot water and blows it into the room

Important note: 1200 thermal watts does not mean 1200 watts of electrical output. This unit does not generate electricity. It is rated by how much heat it can release into the room under favorable conditions.
 

BUILD AND SHIPPING INFORMATION

PiggyPower units are built to order in small batches. Minor cosmetic differences may exist between units, but all performance and function remain the same.

Includes Limited Workmanship Warranty and access to the PiggyPower Lifetime Service Rebuild Program. See the Warranty, Terms, and Service Policy for full details.

Please see the shipping page for current shipping information.